Mechanical AssemblyChecks to test as per documentRework of Mechanical assembly partsIntegration of assembly partsSupport Lean and Health and Safety Initiatives.Provide support and feedback to quality and manufacturing engineeringFabricate or modify parts, using shop equipment.Verify dimensions and clearances of parts to ensure conformance to blueprint specifications, using instruments, such as micro meters, callipers, and height gauges

Must have strong experience in Product design and development from requirements to Conceptual design to architectural design to detailed design and analysis. Experience in design and development of products for Avionics, Defense or space applications is highly desirable.Must have an experience on complete product life cycle from requirements to developing a qualified product.Must have experience in performing feasibility analysis from requirements, different phases of product design, associated reviews and required deliverables in each phase.Excellent understanding of interaction and relationships between key parameters including gain, power levels, linearity, VSWR, NF, and signal related spurious signalsAware of standard receiver and Transmitter design parameters.Capable of understanding and handling mixed signal designs with various layout constraintsExtensive experience in RF and microwave design of active and passive circuits, especially over DC-18GHz, such as IF, L-, S-, C,X, KU-Bands, and ideally to 40GHz.Experience in EDA Simulation Tools Agilent ADS, AWR Microwave Office, HFSS Etc.Experience in Schematic capture tools like Orcad, Mentor Graphics etc.,Very strong skill in the use CAD tools for circuit and system design and simulation.Experience in testing with Instruments: Network analyzer, Signal Generator, Spectrum analyzer, Power Meter, CRO, RF Probe, Noise Source etc.,A proven background in working with RF circuit theory, transmission lines, PCB layout techniques and substrate materials.Must have working experience of product performance evaluation (Hardware Verification) and product qualification to comply to MIL-STD and/or DO-160 standardsShould have experience of working with multi-disciplinary teamShould have an understanding and use of DFMEA, DFT and DFM toolsMust have strong problem solving skills and troubleshooting skills on electronics systems in identifying the root-cause and fixing with an efficient solution and driving the process improvement with lessons learnt.Must have hands on experience on design for EMI/EMC and solving of any issues during the product qualificationStrong experience in Hardware formal qualification, generating HWIVR and supporting certification requirements (DO-254 process)Must have experience in driving new technologies initiative, product improvement initiative, value engineering initiative.Excellent Communication and Outstanding people management ability, and the skills to motivate and inspire CFT teams.

Position - Technician / Sr. Technician / Technical Assistant / Sr. Technical AssistantMechanical AssemblyChecks to test as per documentRework of Mechanical assembly partsIntegration of assembly partsSupport Lean and Health and Safety Initiatives.Provide support and feedback to quality and manufacturing engineeringFabricate or modify parts, using shop equipment.Verify dimensions and clearances of parts to ensure conformance to blueprint specifications, using instruments, such as micro meters, callipers, and height gauges.

Define test strategy with a scheduling approach and a clear view of the risks and opportunities. Manage planning and performance tracking. Be the quality assurance of your solutions Your technical background makes you rigorous, pragmatic and a critical thinker. You know how to manage complexity and conflictsresourceful and creative, you are capable of dealing with unplanned events with reactivity. You have an excellent verbal and written communication skills, good negotiation skills and a recognized capacity to convince all types of stakeholder. Must have strong experience in Radar Product design and development from requirements to Conceptual design to architectural design to detailed design and analysis.Experience in design and development of products for Avionics, Defense or space applications is highly desirable.Must have an experience on complete product life cycle from requirements to developing a qualified product.Must have experience in performing feasibility analysis from requirements, different phases of product design, associated reviews and required deliverables in each phase.Excellent understanding of interaction and relationships between key parameters including gain, power levels, linearity, VSWR, NF, and signal related spurious signalsAware of standard receiver and Transmitter design parameters.Capable of understanding and handling mixed signal designs with various layout constraintsMust have working experience of product performance evaluation (Hardware and Software Verification) and product qualification to comply to MIL-STD and/or DO-160 standardsShould have experience of working with multi-disciplinary teamShould have an understanding and use of DFMEA, DFT and DFM toolsMust have strong problem solving skills and troubleshooting skills on electronics systems in identifying the root-cause and fixing with an efficient solution and driving the process improvement with lessons learnt.Must have hands on experience on design for EMI/EMC and solving of any issues during the product qualificationEnsure that the overall IVVQ strategy is defined and maintained and Tailor the IVVQ environment (process, practices and tools,).Coordinate IVVQ activities, establishing priorities and integration logical diagrams, conducting tests, analysing results and transmitting them to development teams.Define test benches and perform the Test Progress, Consolidate and Report the Test Results.Contribute to qualification/ acceptance/ certification.Strong experience in Hardware formal qualification, generating HWIVR and supporting certification requirements (DO-254 and DO-170 process)Must have experience in driving new technologies initiative, product improvement initiative, value engineering initiative.Excellent Communication and Outstanding people management ability, and the skills to motivate and inspire CFT teams.POC for Customer and supplier Co-ordination, Field trial test performance and System deployment and Certification.

Assembling different electronic components like IC;s, FPGA, BGA, SMD devices using hand tools and soldering irons, SMD workstationTesting modules/ PCB products and parts using measuring tools and software to ensure they meet pre-defined specifications.Identifying and rectifying product defects and assembly problems, replacing faulty components when necessary.Following clean room procedures and safety protocols to handle sensitive electronic components without damage.Collaborating with other team members to optimize production processes and improve the quality of the final products.Populate or modify/replace components on printed circuit board assemblies.Preparing reports documenting the assembly process and any issues encountered along the way.

Define test strategy with a scheduling approach and a clear view of the risks and opportunities. Manage planning and performance tracking. Be the quality assurance of your solutions Your technical background makes you rigorous, pragmatic and a critical thinker. You know how to manage complexity and conflictsresourceful and creative, you are capable of dealing with unplanned events with reactivity. You have an excellent verbal and written communication skills, good negotiation skills and a recognized capacity to convince all types of stakeholder. Must have strong experience in Radar Product design and development from requirements to Conceptual design to architectural design to detailed design and analysis.Experience in design and development of products for Avionics, Defense or space applications is highly desirable.Must have an experience on complete product life cycle from requirements to developing a qualified product.Must have experience in performing feasibility analysis from requirements, different phases of product design, associated reviews and required deliverables in each phase.Excellent understanding of interaction and relationships between key parameters including gain, power levels, linearity, VSWR, NF, and signal related spurious signalsAware of standard receiver and Transmitter design parameters.Capable of understanding and handling mixed signal designs with various layout constraintsMust have working experience of product performance evaluation (Hardware and Software Verification) and product qualification to comply to MIL-STD and/or DO-160 standardsShould have experience of working with multi-disciplinary teamShould have an understanding and use of DFMEA, DFT and DFM toolsMust have strong problem solving skills and troubleshooting skills on electronics systems in identifying the root-cause and fixing with an efficient solution and driving the process improvement with lessons learnt.Must have hands on experience on design for EMI/EMC and solving of any issues during the product qualificationEnsure that the overall IVVQ strategy is defined and maintained and Tailor the IVVQ environment (process, practices and tools,).Coordinate IVVQ activities, establishing priorities and integration logical diagrams, conducting tests, analysing results and transmitting them to development teams.Define test benches and perform the Test Progress, Consolidate and Report the Test Results.Contribute to qualification/ acceptance/ certification.Strong experience in Hardware formal qualification, generating HWIVR and supporting certification requirements (DO-254 and DO-170 process)Must have experience in driving new technologies initiative, product improvement initiative, value engineering initiative.Excellent Communication and Outstanding people management ability, and the skills to motivate and inspire CFT teams.POC for Customer and supplier Co-ordination, Field trial test performance and System deployment and Certification.

Must have strong experience in Product design and development from requirements to Conceptual design to architectural design to detailed design and analysis. Experience in design and development of products for Avionics, Defense or space applications is highly desirable.Must have an experience on complete product life cycle from requirements to developing a qualified product.Must have experience in performing feasibility analysis from requirements, different phases of product design, associated reviews and required deliverables in each phase.Excellent understanding of interaction and relationships between key parameters including gain, power levels, linearity, VSWR, NF, and signal related spurious signalsAware of standard receiver and Transmitter design parameters.Capable of understanding and handling mixed signal designs with various layout constraintsExtensive experience in RF and microwave design of active and passive circuits, especially over DC-18GHz, such as IF, L-, S-, C,X, KU-Bands, and ideally to 40GHz.Experience in EDA Simulation Tools Agilent ADS, AWR Microwave Office, HFSS Etc.Experience in Schematic capture tools like Orcad, Mentor Graphics etc.,Very strong skill in the use CAD tools for circuit and system design and simulation.Experience in testing with Instruments: Network analyzer, Signal Generator, Spectrum analyzer, Power Meter, CRO, RF Probe, Noise Source etc.,A proven background in working with RF circuit theory, transmission lines, PCB layout techniques and substrate materials.Must have working experience of product performance evaluation (Hardware Verification) and product qualification to comply to MIL-STD and/or DO-160 standardsShould have experience of working with multi-disciplinary teamShould have an understanding and use of DFMEA, DFT and DFM toolsMust have strong problem solving skills and troubleshooting skills on electronics systems in identifying the root-cause and fixing with an efficient solution and driving the process improvement with lessons learnt.Must have hands on experience on design for EMI/EMC and solving of any issues during the product qualificationStrong experience in Hardware formal qualification, generating HWIVR and supporting certification requirements (DO-254 process)Must have experience in driving new technologies initiative, product improvement initiative, value engineering initiative.Excellent Communication and Outstanding people management ability, and the skills to motivate and inspire CFT teams.

Develops RTL Designs within environments that have constrained timing and memory resources, designs and implements reusable code, performs design and code reviews, as well as tests and validates product implementations.Understanding of high-level software requirements and low-level software requirements.Capable of developing software verification test cases and test procedures.Analyse and enhance the efficiency, stability, and scalability of system resources.Good understanding of the embedded systems serial protocols (UART/ USB/SPI/i2C/ CANIntegrate and validate new product designs.Support software QA and optimize I/O performance.Provide post-production support.Interface with hardware design and development.Improve system efficiency and stability after development.Collaborate with customers to create systems based on their needsRequirements and skills:Bachelors degree in Electrical/Electronics/ Computer Engineering, Computer Science or a related field.Hands on Exp in RTL design in Verilog, VHDL, ASIC/FPGA experienceIf ASIC experience, then Lint/CDC tool experienceIf FPGA experience, then Xilinx or Altera/Intel , Microsemi FPGA parts and toolsRTL debug experienceKnowledge of at least one industry standard protocols like I2C/SPI/UART, PCIe, MIPI, AXI, EthernetAdequate knowledge of reading schematics and data sheets for components.Strong interpersonal and writing skills.Ability to work as part of a team and as an individual.Exceptional analytical and problem-solving skills.Self-motivated and passionate about work and embedded systems.

Defence System Quality Control and Assurance Practices & standards,DocumentationProduct Qualification processGood knowledge of Mil std, DO-254/DO-178/ JSS 55555/810/461E / Cemilac certificationProduct Development Process ObjectivesInterpret, build upon, and comply with company quality assurance standardsMaintain complaint and nonconformance processing through records and tracking systems, including root-cause analysis and corrective actionsDocument quality assurance activities with internal reporting and auditsPursue continuous education in new solutions, technologies, and skillsResponsibilities (based upon experience/designation)Plan, execute, and oversee product inspection and testing for quality and conformance to specifications and deliverablesAssist operations by tracking, documenting and reporting quality levels as well as environmental, and health and safety KPIsInvestigate reports of product quality issues and ensure resolution in accordance with company guidelines and regulatory requirementsDevelop or update procedures for capture, investigation, and documentation of product complaintsMonitor risk-management procedures, maintain problem logs, and report issues to managers and product developersProvide training and support to quality assurance team members that covers systems, policies, procedures, and core processes.Required skills and qualifications (based upon experience/designation)Deep knowledge of quality assurance terminology, methods, and toolsExcellent analytical, problem-solving, and decision-making skillsProficiency in best practices for testing, version control, and defect managementProfessional certification, such as Six Sigma, CQE, or CQA are preferred.

Defence System Quality Control and Assurance Practices & standards,DocumentationProduct Qualification processGood knowledge of Mil std, DO-254/DO-178/JSS 55555/810/461E/Cemilac certificationProduct Development Process ObjectivesInterpret, build upon, and comply with company quality assurance standardsMaintain complaint and nonconformance processing through records and tracking systems, including root-cause analysis and corrective actionsDocument quality assurance activities with internal reporting and auditsPursue continuous education in new solutions, technologies, and skillsResponsibilities (based upon experience/designation)Plan, execute, and oversee product inspection and testing for quality and conformance to specifications and deliverablesAssist operations by tracking, documenting and reporting quality levels as well as environmental, and health and safety KPIsInvestigate reports of product quality issues and ensure resolution in accordance with company guidelines and regulatory requirementsDevelop or update procedures for capture, investigation, and documentation of product complaintsMonitor risk-management procedures, maintain problem logs, and report issues to managers and product developersProvide training and support to quality assurance team members that covers systems, policies, procedures, and core processesRequired skills and qualifications (based upon experience/designation)Deep knowledge of quality assurance terminology, methods, and toolsExcellent analytical, problem-solving, and decision-making skillsProficiency in best practices for testing, version control, and defect managementProfessional certification, such as Six Sigma, CQE, or CQA are preferred

Looking for a talented and self-motivated technology leader with strong knowledge in Independent Validation or Verification of software and Complex Electronic Hardware (FPGA), who can apply his/her expertise in IV&V activities as per D0-178 and DO-254 standards and build a team capable of taking up IV&V activitiesCandidate should have experience in IV&V activities as per airborne or DRDO standardsResponsibilitiesUnderstand the requirements of IV&VDefine testing requirements in consultation with potential customersDefine Test plan System to meet the requirements Generate required artefacts as per DO-178 and D0-254 standardsBuild a I&V team.Train team members for adoption of new tools & technologiesManage and guide the project teams.Coordinate with development team and customers or approving agency for obtaining the approval of documents.Qualifications & ExperienceBE/BTech or Masters in Electronics or Computer ScienceExperienced in carrying out IV&V activitiesExperience in test code developmentExperience in C, C++ or RTL development for FPGAs Experience in using LDRA Tools and DO-254 ToolsHands on experience in C, C++, VHDL, Verilog will be an added advantage.Awareness of Airborne standards

Must have strong experience in Product design and development from requirements to Conceptual design to architectural design to detailed design and analysis. Experience in design and development of products for Avionics, Defense or space applications is highly desirable.Must have an experience on complete product life cycle from requirements to developing a qualified product.Must have experience in performing feasibility analysis from requirements, different phases of product design, associated reviews and required deliverables in each phase.Excellent understanding of interaction and relationships between key parameters including gain, power levels, linearity, VSWR, NF, and signal related spurious signalsAware of standard receiver and Transmitter design parameters.Capable of understanding and handling mixed signal designs with various layout constraintsExtensive experience in RF and microwave design of active and passive circuits, especially over DC-18GHz, such as IF, L-, S-, C,X, KU-Bands, and ideally to 40GHz.Experience in EDA Simulation Tools Agilent ADS, AWR Microwave Office, HFSS Etc.Experience in Schematic capture tools like Orcad, Mentor Graphics etc.,Very strong skill in the use CAD tools for circuit and system design and simulation.Experience in testing with Instruments: Network analyzer, Signal Generator, Spectrum analyzer, Power Meter, CRO, RF Probe, Noise Source etc.,A proven background in working with RF circuit theory, transmission lines, PCB layout techniques and substrate materials.Must have working experience of product performance evaluation (Hardware Verification) and product qualification to comply to MIL-STD and/or DO-160 standardsShould have experience of working with multi-disciplinary teamShould have an understanding and use of DFMEA, DFT and DFM toolsMust have strong problem solving skills and troubleshooting skills on electronics systems in identifying the root-cause and fixing with an efficient solution and driving the process improvement with lessons learnt.Must have hands on experience on design for EMI/EMC and solving of any issues during the product qualificationStrong experience in Hardware formal qualification, generating HWIVR and supporting certification requirements (DO-254 process)Must have experience in driving new technologies initiative, product improvement initiative, value engineering initiative.Excellent Communication and Outstanding people management ability, and the skills to motivate and inspire CFT teams.Digital Hardware Design-Analog and High-Speed Hardware Development and Testing - Defense Domain

Must have strong experience in Product design and development from requirements to Conceptual design to architectural design to detailed design and analysis. Experience in design and development of products for Avionics, Defense or space applications is highly desirable.Must have an experience on complete product life cycle from requirements to developing a qualified product.Must have experience in performing feasibility analysis from requirements, different phases of product design, associated reviews and required deliverables in each phase.Excellent understanding of interaction and relationships between key parameters including gain, power levels, linearity, VSWR, NF, and signal related spurious signalsAware of standard receiver and Transmitter design parameters.Capable of understanding and handling mixed signal designs with various layout constraintsExtensive experience in RF and microwave design of active and passive circuits, especially over DC-18GHz, such as IF, L-, S-, C,X, KU-Bands, and ideally to 40GHz.Experience in EDA Simulation Tools Agilent ADS, AWR Microwave Office, HFSS Etc.Experience in Schematic capture tools like Orcad, Mentor Graphics etc.,Very strong skill in the use CAD tools for circuit and system design and simulation.Experience in testing with Instruments: Network analyzer, Signal Generator, Spectrum analyzer, Power Meter, CRO, RF Probe, Noise Source etc.,A proven background in working with RF circuit theory, transmission lines, PCB layout techniques and substrate materials.Must have working experience of product performance evaluation (Hardware Verification) and product qualification to comply to MIL-STD and/or DO-160 standardsShould have experience of working with multi-disciplinary teamShould have an understanding and use of DFMEA, DFT and DFM toolsMust have strong problem solving skills and troubleshooting skills on electronics systems in identifying the root-cause and fixing with an efficient solution and driving the process improvement with lessons learnt.Must have hands on experience on design for EMI/EMC and solving of any issues during the product qualificationStrong experience in Hardware formal qualification, generating HWIVR and supporting certification requirements (DO-254 process)Must have experience in driving new technologies initiative, product improvement initiative, value engineering initiative.Excellent Communication and Outstanding people management ability, and the skills to motivate and inspire CFT teams.

Engineering degree (BE ECE/ CS) or equivalent.Hands on Experience in device drivers development in Linux, RT Linux Hands on Experience in VxWorksHands on Experience in Embedded C Programming Hands on Experience in Communication protocols like SPI, RS232, I2C etc.,Experience in Testing and debugging the sub-system and Board level.

Looking for a talented and self-motivated technology leader with strong knowledge in Independent Validation or Verification of software and Complex Electronic Hardware (FPGA), who can apply his/her expertise in IV&V activities as per D0-178 and DO-254 standards and build a team capable of taking up IV&V activitiesCandidate should have experience in IV&V activities as per airborne or DRDO standardsResponsibilitiesUnderstand the requirements of IV&VDefine testing requirements in consultation with potential customersDefine Test plan System to meet the requirements Generate required artefacts as per DO-178 and D0-254 standardsBuild a I&V team.Train team members for adoption of new tools & technologiesManage and guide the project teams.Coordinate with development team and customers or approving agency for obtaining the approval of documents.Qualifications & ExperienceBE/BTech or Masters in Electronics or Computer ScienceExperienced in carrying out IV&V activitiesExperience in test code developmentExperience in C, C++ or RTL development for FPGAs Experience in using LDRA Tools and DO-254 ToolsHands on experience in C, C++, VHDL, Verilog will be an added advantage.Awareness of Airborne standards

Job Description:Develops RTL Designs within environments that have constrained timing and memory resources, designs and implements reusable code, performs design and code reviews, as well as tests and validates product implementations.Understanding of high-level software requirements and low-level software requirements.Capable of developing software verification test cases and test procedures.Analyse and enhance the efficiency, stability, and scalability of system resources.Good understanding of the embedded systems serial protocols (UART/USB/SPI/i2C/CANIntegrate and validate new product designs.Support software QA and optimize I/O performance.Provide post-production support.Interface with hardware design and development.Improve system efficiency and stability after development.Collaborate with customers to create systems based on their needsRequirements and skills:Bachelors degree in Electrical/Electronics/Computer Engineering, Computer Science or a related field.Hands on Exp in RTL design in Verilog, VHDL, ASIC/FPGA experienceIf ASIC experience, then Lint/CDC tool experienceIf FPGA experience, then Xilinx or Altera/Intel , Microsemi FPGA parts and toolsRTL debug experienceKnowledge of at least one industry standard protocols like I2C/SPI/UART, PCIe, MIPI, AXI, EthernetAdequate knowledge of reading schematics and data sheets for components.Strong interpersonal and writing skills.Ability to work as part of a team and as an individual.Exceptional analytical and problem-solving skills.Self-motivated and passionate about work and embedded systems.

Assembling different electronic components like IC;s, FPGA, BGA, SMD devices using hand tools and soldering irons, SMD workstationTesting modules/ PCB products and parts using measuring tools and software to ensure they meet pre-defined specifications.Identifying and rectifying product defects and assembly problems, replacing faulty components when necessary.Following clean room procedures and safety protocols to handle sensitive electronic components without damage.Collaborating with other team members to optimize production processes and improve the quality of the final products.Populate or modify/replace components on printed circuit board assemblies.Preparing reports documenting the assembly process and any issues encountered along the way.